Apexi Power Intake Panel Filter - 2003-2007 Mitsubishi Lancer Evolution
- PART NUMBER: 503-M102
Some manufacturers of performance air filters make aggressive claims about their filter's ability to make power, but leave out the fact that their filters are not effective at filtering dust and dirt. Consider the wear and tear that will result from insufficient filtration.
The Apex Power Intake filter element is engineered to minimize air flow restrictions without compromising its ability to filter contaminants from the induction air stream. We proudly expand the usage of the Power Intake filter element by incorporating it into a line of drop-in, factory-replacement filters. A little TLC for your daily driver.
The Power Intake is dry-type filter and is trouble free. Some of the problems associated with wet type cleaners, such as oil sticking to the air flow meter, are a thing of the past. The Power Intake is basically maintenance free. Filter replacement, when necessary, can be done at a very low cost.
Filter life has been tested to operate over 25,000km (15,000mi) under normal street driving conditions. Filter maintenance and overall life differs depending upon conditions under which the filter is used. Inspect for wear and tear, use best judgment, and replace if damage is suspected.
The filter can be cleaned by blowing compressed air through the filter, opposite the direction of inbound airstream. This filter is designed for use as a dry-type filter. Do not apply filter oil to this filter as it was not designed to utilize such oils. Water, cleaning solvents, and other liquids may damage the filter and must not be used to clean the filter.
- Progressive-density filter element improves power and efficiency, without compromising ability to filter dust and dirt
- Dry-type filter element requires no oiling, and will not foul air flow sensors
- Ideal for light-tune cars, and cars that develop problems with idle and throttle response issues when the factory air box is removed
- Factory replacement filter installs in minutes
- Easy Cleaning and maintenance
|Year||2003, 2004, 2005, 2006, 2007|
|Intake Type||Power Intake Panel|
|Intake Length||215mm (8.46 in)|
|Intake Width||205mm (8.07 in)|
|Intake Height||50mm (1.97 in)|
|OEM P/N Cross Reference||Mitsubishi- MR552951|
WARNING: California Prop 65
Cancer & Reproductive Harm
FRSport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. FRSport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes: parts such as intake, exhaust, and software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls and other items related to vehicle emmisions.
PROP 65 WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.The price of this item includes sales tax reimbursement computed to the nearest cent.
At FRSport, our goal is to ensure that you’re 100% satisfied with your purchase. If, for whatever reason, you are dissatisfied with your purchase, you can return it to us within 90 days of receipt. Please continue below for our terms and conditions.
Damaged in transit & item shortages or incorrect items.
Claims for missing, incorrect items, or items damaged in transit must be submitted to us within 3 business days of receipt of merchandise. Please be sure to check all items once you receive them so that if there is an issue, you are able to notify us as soon as possible.
Returns Due to Merchandise Defect
All items sold by FRSport are warrantied only through their respective manufacturers. If you received a defective item, FRsport will facilitate the warranty process with the manufacturer to get you a replacement part. It is up to the manufacturer to make a decision on the claim. Higher-end brands usually have fewer issues and better warranty support, so keep that in mind when making your purchase decision. We have great working, direct relationships with many manufacturers; this ensures that you will get superior warranty support compared to other shops.
Refused / Undeliverable shipments
Any refused or undeliverable shipments that arrive back at our facility will incur all related shipping costs including return freight charges and any return-to-sender fees assessed by the shipping carrier, which will be deducted from your product refund.
Returns for Refund, Store Credit, or Exchanges
A Return Merchandise Authorization (RMA) number must be requested within 90 days of delivery of the product. Returns without an RMA number will not be accepted. RMA numbers will be valid for 30 days after it is issued.
Returned items are subjected to a 20% restocking fee, excluding any shipping charges. The shipping cost to send the item back to us is not refundable.
For returns that are considered "Buyer's Remorse" or "Ordered Wrong Part", original shipping costs are not refundable as it is the responsibility of the buyer to determine if the part is correct for their application before purchasing and/or request to cancel the order prior being processed/shipped.
Returned or exchanged products must be brand new, unused, and uninstalled. Items should have all original manufacturer's packaging, materials, and accessories, including instruction booklets and packing inserts. If parts are missing or the packaging is damaged it will be up to the manufacturer to determine if the item can be taken back.
The original manufacturer's labeled packaging should be enclosed within an outer shipping box. Please do not write or place shipping labels or stickers on the manufacturer's packaging.
Securely package the product and include the filled out Return Merchandise Form and a copy of the original invoice.
Ship the parcel back to us freight prepaid. We do not accept COD or freight collect shipments. We recommend a shipping method that provides tracking and insurance.
Items that cannot be returned:
- Turbo / Supercharger kits
- External body parts including body kits
- Engine internals and valvetrain
- Wheels and tires
- Most interior items (example: Seats, harnesses etc.)
- Fittings and made to order lines
- Coupler, hose, and piping components
- Promotional products
- Racing suits, shoes, and related clothing
- Liquid Items
- Any item that was a special order
- Open Box / Used items
How to Return an Item
If you meet the requirements above for returning the item, here’s how to proceed.
In order to return an item, you must first obtain an RMA (Return Merchandise Authorization) number. Contact us at email@example.com to request an RMA number. In the subject of the email please put RETURN and your order number.
Place the item(s) you wish to return into a box. Please do not place stickers, shipping labels, write on, or ship using only the manufacturer's box. We are taking the item back and most of the time plan to resell the item. If this is not followed your item may be sent back to you and you will have to cover the shipping, or there may be a restocking fee to cover getting new packaging from the manufacturer.
The RMA number must be clearly written on the outer box, If you received a label in an email, print the label and tape it to the carton.
Ship the parcel back to us freight prepaid. We do not accept COD or freight collect shipments. We recommend a shipping method that provides tracking and insurance. Shipping charges are the responsibility of the customer. We are not responsible for lost or damaged packages.
International customers: Please mark the item as "VENDOR RETURN" to avoid duties and customs.
Send pre-authorized returns to:
17872 Metzler Ln
Huntington Beach, CA 92647
Please allow up to eight business days after we receive the package for your return/exchange/refund to be processed. An e-mail confirmation will be sent to you once the return is processed.