Zeitronix ZR-2 - ZT-2 Multi Gauge Display - Red Digit - Black Bezel
Zeitronix ZR-2 - ZT-2 Multi Gauge Display - Red Digit - Black Bezel
The Zeitronix Wideband Air/Fuel ratio meter and datalogging system is a high quality, stand-alone system for use with carbureted and electronic fuel injection engines. Zt-2 Wideband Kits provide the best bang for your buck delivering unmatched quality, features and capabilities for very reasonable prices. Our system provides the accuracy of a Dyno Air/Fuel reading right in your vehicle as well as multiple engine parameters. Our base system is very easy to install and retails at $279 USD which includes the wideband oxygen sensor, controller, wiring hardware, and the software required to start datalogging and tuning immediately.
Supports Air/Fuel ratio as AFR/Lambda, plus RPM, Vacuum, Boost, Exhaust Gas Temperature, Throttle Position, 0-5 volt sensors, Air/Fluid temperature sensors and Oil/Fuel pressure sensors. Tune fuel injected and carbureted engines.
Very simple installation - connect two wires to +12V and ground and place the O2 sensor in the exhaust stream and you are ready to read AFR! A simple LED indicator displays off, warm-up and running modes. |
Zt-2 Specs
- 0.1 AFR accuracy
- Operating voltage 10V to 18V
- Switching power supply for oxygen sensor heater
- Precise sensor temperature control
- Reverse polarity protection
- Integrated self-resetting fuse
- Positive lock connectors
- Protected inputs and outputs
- Flexible Plug and Play Sensor Harness with a small, easy to route through the fire wall, connector
- Wideband Oxygen Sensor included
- Easy to install plug and play kit
- Adjustable Narrowband Switching Point
- Warning Alarms and Triggers
ZR-2 Features:
- One gauge for displaying Wideband AFR / Lambda, Boost / Vacuum, EGT, and "User2" input values (air/oil/transmission temperature, fuel/oil pressure, voltage or a 2nd AFR/Lambda when in a Dual Channel AFR/Lambda Display configuration
- 4 digit readout available in Blue or Red
- Stylish, machined, brushed aluminum or anodized black bezel and slim enclosure gives the gauge an elegant appearance
- User configurable outer LED and inner digital readout values via a front push button
- Gauge startup setup is configurable
- Robust fail-safe gauge capabilities using the Zeitronix ZAVT-1 Alarm/Trigger. Monitor and trigger on single values or combinations of AFR, Boost, RPM, TPS, EGT, Oil/Fuel Pressure and Air/Water temperatures.
- No PC laptop required for gauge configuration. Cycle through displayed values at any time using the front push button.
- English and Metric Units
- High contrast LED display
- Large 0.3" (7.5mm) digits
- Slim 0.75" (19mm) flat back design for flexible gauge mounting options
- Peak and Hold feature
- SEMA Award Winning gauge
- Made in the USA