GKTech Z33 350z / G35 Front Grip Combo - 15% Off

15% OFF COMBO PRICE!

The GKTECH Front Grip combo is designed for those that are looking for a combo to get everything at once, install it and dial it in with some seat time.

As opposed to piecing a kit together one by one, which ends up costing more in the long run and can be more frustrating, we do recommend doing things once and doing things right and in this case when purchasing all at once we are offering a 15% discount.

At a minimum the lateral links, compression rods and knuckles must be selected to receive the 15% discount, however, this is a good opportunity to add any of the other parts listed that in most cases are a necessity, all the while those complimentary parts also being discounted 15%.

This means it is a good opportunity to get everything you need at the same time!

Below if a brief explanation of the products in this combo, however, more information can be seen in the links provided;

Lateral Link (FLCA) & Compression Rod
The two-piece arm design allows for better bump steer control, resulting in a more consistent alignment while also improving camber gain when turning which maximizes front-end grip by allowing for a flatter contact patch.

The lateral links are adjustable from -0.19' (-5mm) to +1.37' (35mm) relative to the OEM length and have multiple mounting locations for the swaybar to adjust the roll bar rate.

The compression rods are adjustable from -0.19' (-5mm) to +1.18' (30mm) relative to the OEM length. The kit includes two polyurethane bushes to ensure the arm returns to the center as required when the OEM rubber bushes are deleted through the use of this arm.

For more information
Z33 350Z/G35 GRIP FRONT LOWER CONTROL ARMS

Grip Front Drop Knuckle
We've designed a 1.18' (30mm) drop knuckle to raise the roll center height, enhancing roll resistance and overall handling. The bump steer has been optimized with built-in adjustment, allowing you to fine-tune your setup for predictability and consistency. Additionally, the ackermann is adjustable, offering different steering feel preferences to suit your driving style.

Our knuckles ensure optimized camber gain in roll and bump, resulting in a flatter contact patch and more consistent steering feedback. If you want to run ABS with our knuckles, we offer an option to add a bracket to hold the ABS sensor as well.

For more information
Z33 350Z/G35 GRIP FRONT DROP KNUCKLE

NOTE: An internal wheel clearance of 425mm or 16.75" is required. This typically means that an 18" wheel is required. However some models, 18" Enkie RPF1s for example, have smaller barrels and do not clear.

Front Upper Camber Arms
If purchasing our front lower control arms, they will push the bottom of the wheel out, resulting in more negative camber.

Our upper camber arms allow adjustment of the upper arm, fixing that issue. As well as eliminating the OEM rubber bushes, which allow zero flex and have zero chill when in operation. These are replaced with super smooth rose joints, allowing the arm to operate on its correct pane!

The GKTech V2 FUCA's allow for both camber caster and adjustment and new to the V2's is that they are adjustable in situ which will save you a load in setup costs.

For more information
V2 Z33 350Z/G35 FRONT UPPER CAMBER ARMS (FUCA'S)

Front Swaybar Adjustable End Links
These end links are adjustable from 3.34' (85mm) to 4.13' (105mm), ensuring compatibility with both OEM and aftermarket sway bars.

The high misalignment capability of the rod ends reduces the chance of binding and ensures smooth operation, even with aftermarket adjustable sway bars.

For more information
Z33 350Z FRONT SWAYBAR ADJUSTABLE END LINKS