SPC Performance 1-1/2 Deg Camber Caster Sleeve - 4WD SLV - 1 Piece

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23129 to determine the change needed, then install the correct sleeve. To adjust, the sleeve may be lifted and rotated 1/8 turn.

Part No. Total Change
23121 .25 degree (1/4 degree)
23122 .50 degree (1/2 degree)
23123 .75 degree (3/4 degree)
23124 1.00 degree (1 degree)
23125 1.25 degree (1-1/4 degree)
23126 1.50 degree (1-1/2 degree)
23127 1.75 degree (1-3/4 degree)
23128 2.00 degree (2 degree)
23129 0.00 degree (0 degree)

Adjustment range: Camber/Caster .25 degree to 2.00 degree
Installation time: .5 hr/side
Required: 1 per wheel

Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller

NOTE:
To save time during alignment, use the #23109 or #23129 zero sleeve to determine initial readings.

Vehicle Fitments: