SPC Performance 1 Deg. Cam/Cas 4WD SLV

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 to determine the change needed, then install the correct sleeve. To adjust, the sleeve maybe lifted and rotated 1/8 turn.

• Caster/Camber Sleeve Reqr's 1 per Wheel
• Range: Â ±1.00deg Cam/Cas
• Position: Front 4WD
• Position: Front For Early 1990 Model 4WD

Vehicle Fitments: