PLX Devices SM-AFR - Wideband Air/Fuel Sensor Module

PLX Wideband AFR (UEGO) combines an accurate, fast response wideband AFR (Air Fuel Ratio) controller with a Bosch LSU4.9 wideband oxygen sensor. The wideband controller (SM-AFR) works with gasoline, bio diesel, ethanol, methanol, E85, LPG, and CNG. It includes two analog outputs (wideband 0-5V, and narrowband 0-1V) for interfacing with 3rd party devices and one digital serial output for interfacing with the DM-6 gauge and other Multi Gauges. The wideband analog output is ideal for interfacing with aftermarket ECU's and data loggers. The narrowband output is ideal for stock narrowband oxygen sensor replacement where the simulated narrowband analog output is fed back into your ECU to make it operate as if the stock narrowband oxygen sensor is still installed while running the PLX wideband setup. All three outputs can be used simultaneously. Additional features include advanced soft start technology which prolongs the oxygen sensor's life.

New Sensor: Bosch LSU 4.9
New Sensor: O2 Sensor Health
New Sensor: O2 Sensor Reaction Time
New Sensor: Voltage
No Calibration required
Soft start technology
2 analog outputs
1 digital input, 1 digital output
Compatible with multiple fuels
Sensor is hand tested
Digital precision

New on Gen4:
More accurate
Uses only 7.5Watts compared to 10Watts
Faster response time
Improved sensor durability
Faster warm up time
Maintains accuracy throughout life
Less susceptible to contamination
10+ years of average service life

Included Items: 
SM-AFR main unit
Bosch LSU 4.9 wideband sensor
O2 sensor harness 10ft
Sensor Module Connect Kit (4ft power wire with 2.1mm connector, 4ft Analog wires and connector with 4 terminals, 1ft Serial Cable, 4 Pin connector for SM-AFR connectivity, 2 Terminals for 4 pin Connector)
Termination jumper
User Manual
*O2 Bung and Cap Sold Separately