Ground Control MAZDASPEED3 - Ground Control Complete Suspension System

This kit fits the 2007-2013 Mazdaspeed 3

Ground Control Spring Kits

This spring kit gives you the option to customize the ride height of your vehicle. After several years of use in racing applications, Ground Control spring kits have been adapted for street use. Most other spring kits offer only one set ride height when installed. The Ground Control system's unique design allows for easy adjustment. Simply lift the corner(s) of the vehicle that you wish to adjust and spin the adjustable spring seat up or down to raise or lower the vehicle*. Ground Control spring kits are also designed to be used with either stock or aftermarket shocks. Off the shelf (not GC)Koni front struts or GC hardware may need modification to clear the Koni sway bar mount, which is different than stock.

*Some applications require the use of a provided wrench.

Springs: We are pleased to announce that Eibach has chosen Ground Control as the west coast distributor for their ERS (Eibach Race Spring) line of springs. All of our ride height adjustable kits now exclusively feature Eibach springs. All racing and street/show spring rates are available. All Eibach springs offer a lifetime warranty against spring rate change and sagging.

Adjusters: All adjusters consist of a threaded sleeve and adjustable spring seat. And are made using high strength 6061-T6 aluminum; anodized for greater durability and appearance. The threads on the adjusters are square cut which locks the adjustable spring seat in place under load. For further precaution, a setscrew in the adjustable spring seat can be used to secure adjustment. Upper spring perches are used to insulate the spring.

Ground Control works very hard with Eibach USA to make these springs to the standards that you demand. Lifetime guarantee on everything, not just springs. No excuses about "racing" or "special". If anything fails, while being correctly installed, it will be taken care of, period. We can only have a guarantee like this because every single part of the Ground Control Street coil-over kit is made by us or someone we trust. None of these parts are made in Taiwan. Everything is made in the USA.

2010-2013 Mazdaspeed3 Camber Plates

These plates feature 30mm of total camber adjustment with the ability to make corrective caster changes to equalize side-to-side caster in the stock position.

Other features include replaceable waterproof German axial load bearings (not included if using OE Style springs) and urethane bushings for long life, less deflection, and a smooth silent ride on stock or aftermarket sized springs.

All components are anodized or zinc plated for corrosion resistance.

We also offer our lifetime guaranty! (Bearings not included)

• A clean sheet design for street cars, not an adapted spherical race plate.

• Waterproof, German-made, axial load steering bearings (not included if using OE Style springs)

• Allows for up to 30mm total camber adjustment.

• Unique slot design allows for caster correction.

• Urethane center mounts reduce NVH, yet do not flex.

• All components plated or anodized for corrosion resistance.

• Zinc plated mounting bracket for ease of install and adjustment.

Torque camber plate mounting nuts to 18ft/lbs using properly calibrated torque wrench. DO NOT USE PNEUMATIC TOOLS