
Mishimoto Intercooler Pipe and Boot Kit - 2010-2012 Dodge 6.7L Cummins

Mishimoto has developed an intercooler pipe and boot kit specifically engineered for use on the 2010-2012 Dodge 6.7L Cummins. After investigating the pipe routing and Size, our engineers identified numerous areas where improvement was necessary. The Mishimoto Cummins performance intercooler pipes are constructed of mandrel-bent aluminum routed in a way that eliminates restrictive bends present in the factory pipes. Mishimoto engineers also increased the pipe diameter from 3" to 3.5" to provide substantial improvements in power, airflow, and EGTs.
Mishimoto DuraCoreT boots and Constant-Tension T-bolt clamps are also included in this Cummins performance kit.
Mishimoto DuraCoreT technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCoreT provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. The Mishimoto Dodge 6.7L Cummins Intercooler Pipe and Boot Kit is designed to work with the Mishimoto Dodge 6.7L Cummins Performance Intercooler.
- Replaces weak factory plastic cold-side pipe
- Replaces small diameter hot-side pipe
- Improves airflow, power, and EGTs
- Installs in under two hours
- No additional tuning required
- Mandrel-bent polished aluminum pipe eliminates restrictive bends
- Fits with Mishimoto Dodge 6.7L Cummins Performance Intercooler
- Includes Mishimoto Silicone Boots with DuraCoreT technology and Mishimoto Constant-Tension T-bolt Clamps
- Polished Aluminum Pipe Construction
- Pipe Diameters: Hot-Side: 3.0"
Cold-Side: 3.5"
- 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps.
These clamps have an operating range of 18-35 in-lbs (2-4N*M).
Do not exceed the maximum torque rating of 35 in-lbs (4N*M).
- (3) 3.25" Constant-Tension T-Bolt Clamp
- (5) 4.0" Constant-Tension T-Bolt Clamp
- Boot 1: 3.0"
Boot 2: 3.0"-3.5" - >Boot 3: 3.5"
- Boot 4: 3.5"
- Boot 4: 3.50"
- (2) Aluminum Pipes
- (4) Silicone Boots with DuracoreT Technology
- (8) Constant-Tension T-Bolt Clamps
- (2) Aluminum Mishimoto "M" Logo Badges
- 10-12 Dodge Ram 2500 w/ 6.7L Cummins Engine
- 10-12 Dodge Ram 3500 w/ 6.7L Cummins Engine
- 10-12 Dodge Chassis Cab w/ 6.7L Cummins Engine
Vehicle Fitments:
Year | Make | Model | Submodel |
---|---|---|---|
2009 | Dodge | Ram 2500 | Crew |
2008 | Dodge | Ram 2500 | SLT Big Horn |
2007 - 2008 | Dodge | Ram 2500 | SLT Sport |
2007 - 2010 | Dodge | Ram 2500 | ST, Power Wagon, SLT, Laramie |
2008 - 2010 | Dodge | Ram 2500 | SXT |
2010 | Dodge | Ram 2500 | TRX |
2007 | Dodge | Ram 2500 | TRX4, Sport |
2007 - 2010 | Dodge | Ram 3500 | SLT, Laramie, ST |
2008 - 2010 | Dodge | Ram 3500 | SXT |
2007 | Dodge | Ram 3500 | TRX4, Sport |
2015 - 2016 | Ford | F-150 | Platinum, Lariat, XL, XLT, King Ranch |
2016 | Ford | F-150 | SSV, Limited |
2013 - 2015 | Ram | 2500 | Big Horn, Tradesman, Lone Star |
2014 - 2015 | Ram | 2500 | Laramie Limited |
2012 - 2015 | Ram | 2500 | R/T, Hemi Sport |
2011 | Ram | 2500 | SLT Sport |
2011 - 2015 | Ram | 2500 | SLT, Laramie, Outdoorsman, ST, Power Wagon, Laramie Longhorn |
2011 - 2013 | Ram | 2500 | SXT |
2014 - 2015 | Ram | 3500 | Laramie Limited |
2011 - 2015 | Ram | 3500 | Laramie Longhorn, Laramie, SLT, ST |
2011 - 2013 | Ram | 3500 | SXT |
2013 - 2015 | Ram | 3500 | Tradesman, Lone Star, Big Horn |
