ICON 2025 Toyota 4Runner 2WD Front 2.5 VS RR CDEV Coilover Kit 58796E

ICO 2.5 Series Coilover Kits

Coilover Set

APPLICATION NOTE #85: Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range. | APPLICATION NOTE #202: ICON Delta Joint Pro front upper control arms are recommended to maintain proper wheel alignment above 2" of lift | Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.) | APPLICATION NOTE #232: Only fits 2WD models. Installation onto 4WD models will result in damage to front axles. | APPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install | APPLICATION NOTE #153: Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles | APPLICATION NOTE #198: An iOS operated device is required to run ICON Intelligent Control App | APPLICATION NOTE #203: Also requires installation of applicable IIC kit and CDEV rear shocks | APPLICATION NOTE #4: Advertised lift heights based on models equipped with gasoline engine | Recommended Aftermarket Wheels: ICON Alloys - 18x9 with 6.6” Backspace / 40mm Offset | Recommended Aftermarket Wheels: 17x8.5 with 6.32” Backspace / 40mm Offset | APPLICATION NOTE #150: Shocks are fully serviceable | OEM Wheels & Tires Fitment: Yes

ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir CDEV front coilover shocks are an incredible upgrade for the front end of the 2025 Toyota 4Runner 2WD. These adjustable coilovers allow up 1.25-3” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific valving, their large 2.5” shock body with increased piston surface area over stock components, and their optimized extended length taylored specifically for 2WD models, yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV's hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly. When paired with 2.5 Aluminum Series CDEV rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your 6th Gen Toyota 4Runner.

ICON 2.5 Series front coilover shocks are an incredible upgrade for the 2025 Toyota 4Runner. These adjustable coilovers allow up 1.25-3” of lift with vehicle-specific shock length and valving for superior ride quality and performance.