Haltech Platinum PRO Plug-in Mitsubishi Lancer EVO 8 9 MIVEC 6 Spd.

Features: 
Direct plug and play replacement of the OEM ECU, no re-wiring necessary. 
Uses the cars factory sensors 
Supports Sequential Injection (peak and hold) and Direct fire ignition 
Windows 2000, XP, Vista, Windows 7 compatible software 
Real time programming, instant hesitation free adjustment while engine is running 
Fully user definable 32 x 32 mapping 
Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF 
Diagnostic Trouble Code Storing & Check Engine Light Control 
(Access through laptop only ) 
Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost) 
Wideband "auto tuning" using user definable target AFR table 
USB and CAN Communication Port 

Factory Outputs: 
4 x Fuel Injector outputs 
2 x Ignition outputs 
Tacho , MIVEC Control, Boost Control, Intercooler Sprayer,Idle Control, 
Thermo Fan (variable speed), Fuel Pump (variable speed) 
A/C Clutch Relay, Check Engine Light 

Factory Inputs: 
MAF Sensor, Throttle Position Sensor, Knock Detection Sensor 
 Oxygen Sensors, Coolant Temperature Sensor, Vehicle Speed Sensor 
Air Temperature Sensor, MAP Sensor (JDM and USA Only), 
 Power Steering Switch 

Expansion I/O*: 
 2 x Analogue Voltage inputs 
 2 x Analogue Temperature inputs 
 4 x Digital pulsed outputs 
*Optional auxiliary harness required to be purchased Haltech Part # HT040003 

Functions: 
Knock Control 
Long Term Fuel Trim 
ACF On - Base Tables 
Closed Loop O2 Control 
 Decel Cut 
 Over Boost 
Closed & Open Loop Boost Control 
 Gear Setup 
 Transient Throttle Enhance 

Correction Tables:  Fuel  Ignition  Boost: 
Cranking 
 Air Temp Target Correction 
Coolant Temperature Correction 
Map Correction 
 Zero Throttle Gear Correction 
Cylinder Trim 
 TPS Correction 
Generic Correction 1* 
Generic Correction 2* 
Gear Correction 
Post Start 
 Air Temp Duty Correction 
Post Start 
* Generic Correction tables have user definable axis 

Miscellaneous: 
Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data 
Max 20 channels logging capability 
Tune can be password protected in software 
Rugged anodized aluminum casing 

Power Requirements: 
Source: 8.6 to 16.5 Volts DC 
Consumption: 530mA @ 12Volts DC 

Physical Dimensions: 
ECU Dimensions Length: 154mm (174mm with MAP nipple) 
Width: 158mm Height: 42mm Weight: 680g (1.5 lb) 

Applications: 
Mitsubishi Evolution 9 (JDM, USA, AUS & RHD Euro models only) 
Mitsubishi Evolution 8 MR (JDM, AUS & RHD Euro models only) * 
*Not suitable for USA Spec Evolution 8 MR 

Engine Codes: 
4G63 

Transmission: 
Manual Only (Automatic not supported) 

Not Supported Functions: Immobiliser 

The Platinum Pro Plug-in Mitsubishi EVO 9 Kit includes: 
Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)