Haltech Platinum PRO Plug-in Nissan R32/33 Skyline Kit Manual Trans.

Features:

Direct plug and play replacement of the OEM ECU, no re-wiring necessary. 
Uses the cars factory sensors 
Supports R32 GT-R twin MAF sensors 
Supports Sequential Injection (peak and hold) and Direct fire ignition 
Windows 2000, XP, Vista, Windows 7 compatible software 
Real time programming, instant hesitation free adjustment while engine is running 
Fully user definable 32 x 32 mapping 
Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF) 
OBD II Code Storing & Malfunction Indicator Light (MIL) Control * * (Access through laptop 
only ) 
Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost) 
Wideband "auto tuning" using user definable target AFR table 
USB and CAN Communication Port 

Factory Outputs: 
6 x Fuel Injector outputs 
6 x Ignition outputs 
Tacho, Boost Control, AC Clutch Relay, Idle Control 
Thermo Fan, Check Engine Light, Fuel Pump (Variable Speed) 
N-VCT ( Nissan Variable CAM Timing Control) 

Factory Inputs: 
MAF sensors, Throttle Position Sensor, Oxygen sensors, 
Coolant Temperature sensor, Vehicle Speed Sensor, 
Air Temperature sensor. 

Expansion I/O*: 
2 x Analogue Voltage inputs 
2 x Analogue Temperature inputs 
4 x Digital pulsed outputs 
*Optional auxiliary harness required to be purchased Haltech Part # HT040003 

Functions: 
Closed Loop O2 Control 
Decel Cut Over Boost Rev Limiter 
Closed & Open Loop Boost Control 
Gear Setup 
ACF On Base Tables 
Transient Throttle Enhance 

Correction Tables: Fuel Ignition Boost: 
Cranking 
Air Temp Target Correction 
Coolant Temperature Correction 
Map Correction 
Zero Throttle Gear Correction 
Cylinder Trim 
TPS Correction 
Generic Correction 1 
Generic Correction 2 
Gear Correction 
Post Start 
Air Temp Duty Correction 
Post Start 

Miscellaneous: 
Data Logging: 448Kb of onboard data logging, 
Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data 
Max 20 channels logging capability 
Tune can be password protected in software 
Rugged anodized aluminum casing 

Power Requirements: 
Source: 8.6 to 16.5 Volts DC 
Consumption: 530mA @ 12Volts DC 

Physical Dimensions: 
ECU Dimensions Length: 154mm (174mm with MAP nipple) Width: 158mm Height: 42mm Weight: 680g (1.5 lb) 

Applications: 
Nissan Skyline R32, Nissan Skyline R33  Variations: GT-R, GTS-t 

Engine Codes: 
RB25DET, RB26DETT   

Transmission: 
Manual only (Automatic not supported) 

The Kit includes: 
Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)