Godspeed BMW 3-Series(E30) RWD 1985-91 Monoss Coilovers(51mm)

SKU: 10K4N | MPN:  MSS0950
Only 17 units left
Sale price$675.00 USD Regular price$750.00 USD
Save $75.00

Godspeed Project's MonoSS is our one entity in our family of single-adjustable coilover suspension kits. These coilovers are designed to be a streetable race built coilover at an affordable price. It features a monotube damper that is made out of a carbon seamless steel 52mm tube with a performance internal piston providing maximum damper response. The cold-bent springs are made from high strength SAE9252 steel to optimize the balance between performance and comfort. Using race quality shock oil, Godspeed Project can guarantee exceptional damper performance at any temperature on and off the track. The top of the shock is attached to the car using a high quality top hat that features a high performance Japanese KOYO 6204Z bearing pillow ball mount (when applicable). The bottom shock brackets are made out of a T7075 forged aluminum or carbon steel brackets for lighter weight without sacrificing durability which also includes brake line brackets (when applicable). The MonoSS offers 16 level of damper adjustability which can be set to your preference.

FEATURES:

  • Front camber plates with pillowball mount for camber adjustment
  • Spring rates: Front: 8 kg/mm / Rear: 8 kg/mm
  • 16 precise levels of damper adjustment
  • Koyo Japan 6204z bearing
  • Polyurethane bushing (if applicable)
  • Monotube shock design
  • Anodized shock body
  • Lightweight aluminum lower mount and T7075 forged aluminum / carbon steel brackets
  • 52mm carbon steel shock body with a performance internal piston
  • Independent ride height and spring preload adjustments
  • Race shock oil with a high viscosity index
Spring Front Rear
Rate(kg/mm) 8 10
Length (mm) 180 135
I.D. (mm) 62 62
Camber Plate Yes No

Prior to installation, verify all hardware and properly preload suspension to 10mm. Our technical department is available to answer any other questions.

ADDITIONAL INFORMATION

Special Notes Prior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1/4-3/8in). Our technical department is available to answer any other questions.
Damping Levels 16 Levels
Height Adjustment Yes
Spring Rate(Front) 8 kg/mm
Spring Rate(Rear) 10 kg/mm
SPRING LENGTH(FRONT) 180 mm
SPRING LENGTH(REAR) 135 mm
Camber Plate(Front) Yes, With Pillow Ball
Camber Plate(Rear) No
Spring Inner Diameter(ront) 62 mm (2.44 inch)
Spring Inner Diameter(Rear) 62 mm (2.44 inch)

NOTE: Original spindles must be modified and welded onto the lower front brackets. The front lower brackets are made of steel for this purpose. This coilovers suspension kit will not fit the AWD application.

Rubik Cubes make a perfect gift for any occasion. Learn more about this entertaining puzzle visiting ruwix.com.

Related Products