Edge EAS Shift-On-The-Fly (SOTF) Accessory 2011-2016 Chevy/GMC 6.6L LML
Edge EAS Shift-On-The-Fly (SOTF) Accessory 2011-2016 Chevy/GMC 6.6L LML
Out of stock
Not sure this is the right part? Ask us to check fitment. Include your year, make, model, engine and manufacturer part number.
Need this part?
This item is currently unavailable. Ask us about availability or help finding a suitable replacement.
Shipping & returns
This selection is unavailable. Ask us to confirm availability and timing.
Shipping details
In-stock orders are processed within 48 hours; transit time is additional.
International orders include export processing and customs clearance. Duties, taxes and brokerage are extra; final freight charges may change after remeasurement.
Read the shipping policyEAS Shift-On-The-Fly (SOTF) Accessory 2011-2016 Chevy/GMC 6.6L LML Duramax
Edges all-new EAS Shift-On-The-Fly (SOTF) allows you to change custom tunes on the fly utilizing the Insight CS2 or CTS2. The EAS SOTF part numbers cover the 2011-2016 Duramax, 2010-2018 Cummins, and 2011-2019 Power Stroke. Customers can now change tunes right on the screen! Many companies use a voltage signal to change between their 5 tune levels, when tuned with custom tuning software. Instead of drilling a hole in the dash, add the EAS SOTF accessory to an Insight monitor to control custom tunes while driving down the road.
Here is how it works:
1. The EAS Shift-on-the-fly accessory, connected to your Insight CTS2, will control your tune levels for vehicles requiring a switch to control the power levels.
2. Switching occurs by changing voltages between 1v, 2v, 3v, 4v, 5v. Most custom-tuned vehicles run within these parameters.
3. Wire or plug the switch in just as you would your normal Shift-On-The-Fly (SOTF) or Driver-Selectable-Tuning (DST) switch. Then, flash the tune into your vehicle that enables the SOTF/DST functions.
4. Enjoy changing your power levels right through the Insight CS2 or CTS2 screen.
Note: The Duramax EAS accessory plugs into the ECM. Only controls tuning levels that change voltage resistance through ECM pins. Also, must be plugged in as instructed with ground and signal wires.
