• 2008-2014 Subaru Impreza WRX
• 2008-2014 Subaru Impreza WRX STI
• 2008-2012 Subaru Legacy GT
• 2009-2013 Subaru Forester XT
• Compatible with stock and aftermarket turbo systems
• Works with factory and aftermarket ECU tunes
• Compatible with E85 fuel systems

• Direct OEM replacement with significant performance improvements
• 20% higher flow rate compared to stock solenoids
• Faster boost response and reduced turbo lag
• Improved high-temperature stability for consistent performance
• Reduced pressure drop at high boost levels
• Compatible with E85 and other alternative fuels
• Optimized internal port design for smoother airflow
• Tested to over 1.5 million cycles for maximum reliability

Installation is straightforward and can be completed in under 30 minutes with basic hand tools:

1. Locate the factory boost solenoid on the passenger side of the engine bay
2. It's accessible from underneath the intake manifold
3. Disconnect the electrical connector by pressing the tab and pulling gently
4. Disconnect the vacuum lines, taking note of their orientation
5. Remove the mounting bolt(s) securing the solenoid
6. Install the new solenoid in the reverse order
7. Ensure vacuum lines are reconnected in the correct orientation
8. Secure the mounting bolt(s) to factory torque specifications
9. Reconnect the electrical connector until it clicks

Pro Tip: No ECU reflash is required for stock applications, but we recommend checking your wastegate actuator function after installation for optimal performance.