How to install Front eccentric Bolts

Difficulty: Moderate

Step 1

Loosen but do not remove the upper strut bolt.

Step 2

Loosen and remove lower strut bolt.

Step 3

Using a 15mm wrench, install the SPC bolt with the big tab facing outward toward the wheel for negative camber or inwards for positive camber.

Step 4

With the preferred camber settings, tighten the upper strut bolt.

Once the tire is back on, proceed with proper alignment.

Once complete with alignment, torque to recommended specs from SPC which is 97 lb-ft.

Note: DO NOT OVER TORQUE!