Apexi D-Jetro Choose the Correct Add-Ons
Share
Choosing the correct parts to work with the D-Jetro version of the Apexi Power FC can be confusing. We sell the unit and necessary components separately. This can help people buying used D-Jetro Power FCs or those who forgot to purchase the parts needed to complete their upgrade.
Please note that the D-Jetro (MAP) ECU is different than the L-Jetro (MAF) ECU. You cannot use the D-Jetro sensors to "upgrade" your L-Jetro ECU.
We have also created a FR Sport Power FC D-Jetro Kit to make choosing the correct components.
| APEXi POWER FC PARTS LIST | ||||||||
| Part No. | Year | Engine | Description |
D-Jetro Kit |
Boost Control Kit | NOTES | ||
| Mitsubushi | ||||||||
| 414-KM905 | 97-99 | 4G63 | Mitsubishi Eclipse GST/GSX D-Jetro | Kit #1 | 415-A013 | *10 | ||
| 414-KM908 | 03-05 | 4G63 | Mitsubishi Lancer EVO 8 D-Jetro | Kit #1 | 415-A013 | |||
| 414-BM008 | 01-02 | 4G63 | Mitsubishi EVO 7 D-Jetro | Kit #1 | 415-A013 | |||
| 414-BM004 | 99-01 | 4G63 | Mitsubishi EVO 6 D-Jetro | Kit #1 | 415-A013 | |||
| 414-BM005 | 97-98 | 4G63 | Mitsubishi EVO 5 D-Jetro | Kit #1 | 415-A013 | |||
| Nissan | ||||||||
| 414-BN019 | 93-96 | SR20DET | Silvia S14（B/M/C） D-Jetro | Kit #2 or Kit #1 | 415-A001 | *1, *7 | ||
| 414-BN020 | 91-94 | SR20DET | Silvia S13/ RPS13 D-Jetro | Kit #1 | 415-A013 | *1, *7 | ||
| 414-BN021 | 93-96 | SR20DET | 180SX (Mid Minor Change) D-Jetro | Kit #1 | 415-A013 | *1, *7 | ||
| 414-BN023 | 96-99 | SR20DET | 180SX RPS13(A/M/C） D-Jetro | Kit #1 | 415-A013 | *1, *2, *7 | ||
| 414-BN024 | 99-02 | SR20DET | Silvia S15　D-Jetro | Kit #1 | 415-A013 | *1, *2, *7 | ||
| 414-BN025 | 99-02 | RB26DETT | BNR34 Skyline GTR D-Jetro | Kit #3 | 415-A001 | *6 | ||
| 414-BN026 | 89-99 | RB26DETT | BNR32/BCNR33 D-Jetro | Kit #3 | 415-A001 | *6 | ||
|
*1 When using the P-FC alone, it may be necessary to change the initial settings depending upon air cleaner and air flow meter type. |
||||||||
| All Nissan vehicles must set initial settings to (No Boost Control Kit | ||||||||
| *2 When using the Boost Control Kit, it is necessary to modify the wiring of the factory solenoid valve. | ||||||||
| *6 Pressure Sensor (499-X001)×2, D-Jetro P/S Harness(415-XA04),and φ4 Nipple x2 (499-A019) are required. | ||||||||
| *7 FD3S Factory Intake Air Temp Sensor (N3A1 18 845) and D-Jetro Intake Air Temp Harness (415-XA03) are required. | ||||||||
| *10 May be used on 1995-1996 Eclipse models, modification to the Cam Angle Sensor Required. | ||||||||
| D-Jetro Parts: When running a D-Jetro P-FC, the following parts are necessary | ||||||||
| 499-X001 | Pressure Sensor | |||||||
| 49C-A002 | Pressure Sensor Harness 3 Pin (For Use on ***P/N: 414AN025, 414AN026, 414AN019) | |||||||
| 49C-A004 | Pressure Sensor Harness 5 Pin | |||||||
| N3A11845 | Intake Temperature Sensor | |||||||
| 415-XA03 | Intake Temp. Sensor Harness | |||||||