Tomei PonCam Intake & Exhaust Camshafts Set RB25DET Series 2

• Increase power

• Optimized response

• Complements other upgrades

Tomei PonCam and ProCam are a popular choice for camshafts. With Tomei's extensive dyno testing and years of experience, these camshafts are optimized for each application. Tomei normally starts off with 256 degree for low profile application that requires an overall improvement in power band without sacrificing low end. With higher power in mind, Tomei develops the 260 degree version to focus on mid to high rpm.  Then comes the 270 and 280 degree versions that focus mainly on high rpm to extract maximum horsepower from the engine. Tomei ProCam offers lash (hydraulic lifter) and solid (solid lifter) type camshafts with different degrees. With Tomei PonCam and ProCam, you will always find the right camshaft for your application and needs.

NOTE: Series 2 motors did have a late model and an early model. Later models will not work with this cam as they use Series 1 CAS. Please call a representitive with any questions you may have.

Specs:

• Duration: 256 Deg IN / EX
• Lift: 8.50mm IN / EX
• For RB25DET Series 2

 

Price is for Intake & Exhaust Camshafts.

Available Camshafts

Type	Application	Duration(IN)	Duration(EX)	Lift(IN)	Lift(EX)	Part
	R33(1st),WGNC34(1st),C34	256°	256°	8.5	8.5	143020
	R33(2rd),WGNC34(2nd)					143050
A	R34,WGNC34(3rd) NEO straight 6(exclude RB25DE)	252°	252°	9.15	9.15	143046
B		260°	260°			143023