{"product_id":"haltech-nexus-rebel-for-ls-gen-iv-engines-pnp-for-bmw-e36","title":"Wiring Specialties LS1 ECU \u0026 Electronics Haltech NEXUS Rebel PNP for BMW E36 WRS-HT-220204-E36","description":"\u003cp\u003eHaltech Rebel LS Gen IV ECU \u0026amp; Harness plus Wiring Specialties PNP Chassis Interface Harness   If you’re planning on putting a General Motors LS into your project car, then Haltech's all-new Nexus Rebel LS Engine Management System and terminated wiring harness is perfect for you!   It's an Engine Management System and Terminated Engine Harness package that provides a very cost-effective and simple solution to get your General Motors LS engine up and running.   With the fully integrated Wiring Specialties Chassis Interface Harness, the entire process is Plug-and-Play, giving you dashboard functionality and other Chassis functions.    FEATURES\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eECU designed from the ground up to suit GM's popular LS engine platform\u003c\/li\u003e\n\u003cli\u003eStart-up is a breeze thanks to the new LS Set-up Wizard in our NSP software\u003c\/li\u003e\n\u003cli\u003eComes complete with an easy-to-install harness to suit multiple GM LS applications\u003c\/li\u003e\n\u003cli\u003eEasy integration with Haltech dashes, PDMs, sensor kits, and accessories\u003c\/li\u003e\n\u003cli\u003eKit Supports Gen IV engines with drive by wire (DBW) using a non-OEM Electronic Throttle Pedal. The Rebel LS comes with dedicated inputs and outputs that don’t require configuration and work as intended right out of the box. Every wire in the harness is labeled and configured in the software so there’s no chance of a setup or configuration problem. There’s simply no need to spend hours working on a pin-out or assigning pins and functionality in the software. Just read the labels on the harness and plug them into the associated device.  But we know that if you’re putting an LS into your project car there will always be a level of customization, so we’ve included some configurable channels. • 1x 25amp output • 5 x digital outputs • 4 x digital inputs • 2 x analogue inputs These are user-configurable and extra to the inputs and outputs required to run the engine.  Kit Includes\u003c\/li\u003e\n\u003cli\u003eHT-220001\u003c\/li\u003e\n\u003cli\u003eRebel ECU\u003c\/li\u003e\n\u003cli\u003eHT-186500\u003c\/li\u003e\n\u003cli\u003eMain Harness\u003c\/li\u003e\n\u003cli\u003eHT-186505\u003c\/li\u003e\n\u003cli\u003e6 Pin DBW Adaptor\u003c\/li\u003e\n\u003cli\u003eHT-186507\u003c\/li\u003e\n\u003cli\u003eCorvette pedal adaptor\u003c\/li\u003e\n\u003cli\u003eHT-186502- LS EV6 Injector Sub-Harnes\u003c\/li\u003e\n\u003cli\u003eHT-187003\u003c\/li\u003e\n\u003cli\u003eT56 Transmission Harness\u003c\/li\u003e\n\u003cli\u003eHT-186123\u003c\/li\u003e\n\u003cli\u003e2 Pin Bosch Alternator Harness*\u003c\/li\u003e\n\u003cli\u003eHT-186124\u003c\/li\u003e\n\u003cli\u003e4 Pin Delco Alternator Harness*\u003c\/li\u003e\n\u003cli\u003eHT-186125\u003c\/li\u003e\n\u003cli\u003e2 Pin Yazaki Alternator Harness*\u003c\/li\u003e\n\u003cli\u003eHT-186510\u003c\/li\u003e\n\u003cli\u003eGen IV Oil pressure sensor adaptor harness\u003c\/li\u003e\n\u003cli\u003eHT-186511\u003c\/li\u003e\n\u003cli\u003eGen IV MAP sensor adaptor harness * Haltech Rebel Alternator sub-harnesses will be in the box but are NOT used with this Wiring Specialties Plug-N-Play setup. Sensor Pack\u003c\/li\u003e\n\u003cli\u003eBosch LSU 4.9 Sensor\u003c\/li\u003e\n\u003cli\u003eWeld on fitting for O2 Sensor\u003c\/li\u003e\n\u003cli\u003eAir Temperature Sensor M14 x 1.5\u003c\/li\u003e\n\u003cli\u003eWeld on fitting for Air Temp Sensor On the transmission side of things, the harness includes the electrical connector for the T56 speed sensor, but you could run any manual gearbox or mechanically shifted automatic transmission like a Powerglide or TH400. We will be adding support for popular electronically controlled transmissions in the future, and they will integrate with the current harness system. The Rebel LS has a “CAN” communication network that allows communication with all the popular Haltech CAN devices like the iC-7 Dash, 8 and 15 Button Keypads, and the Power Distribution Modules or PD-16s. In fact, you could connect up to 4 PD-16 units and have the entire car including headlights and taillights controlled through the ECU avoiding the need for external fuses and relays. As for the software, there’s a setup wizard that runs when you first go online with the ECU. It asks for a little information about your particular setup then it builds the Fuel and Ignition maps, as well as makes setup changes depending on the configuration. It’ll ask things like which variant of engine you’re using, what’s the compression ratio, what camshaft you are using, what injectors, and which coils. Asking you to let us know which components are in play, so we can build the closest tune file for your combination. The Rebel LS ECU is equipped with advanced long-term learning which allows it to monitor the Air to Fuel ratio, the ignition table, and knock detection feedback as well as idle quality and continually make adjustments in the background. The longer the engine runs the better the tune-up gets! You can go online with the Nexus NSP software and make tuning changes just like you’re used to with the rest of the Haltech range, but there is certainly no need to – The setup wizard takes care of it all! JUST THE FACTS OUTPUTS   Ignition 8 x Pre-Configured Outputs Injector 8 x Pre-Configured Outputs (High Impedance Only) Low Side Switched \/ Digital Pulsed Outputs (DPO) 5 25A Outputs 3 x Dedicated (Ignition \/ Injection, Fuel Pump and Cooling Fan) 1 x User Definable     INPUTS   User Definable Analog Voltage Inputs (AVI) 2 Engine Position Inputs 2 x Dedicated Crank And Cam inputs User Definable Synchronised Pulsed Inputs (SPI) 4 (Can Be Programmed For AVIs) Pre Configured Knock Inputs 2 On-board Wideband Controller (LSU 4.9 Only) 1 (Expandable To 10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wiring Specialties","offers":[{"title":"Default Title","offer_id":48086431367320,"sku":"9HVAQ","price":1995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/0867\/0360\/files\/wiring-specialties-wrs-ht-220204-e36-main.png?v=1771224077","url":"https:\/\/frsport.com\/products\/haltech-nexus-rebel-for-ls-gen-iv-engines-pnp-for-bmw-e36","provider":"FR SPORT","version":"1.0","type":"link"}